no need for a plumber! fix a leaky faucet by yourself!
If you hate losing sleep just because of that unending, annoying, and frustrating noise of a dripping, leaky faucet, then it's about time you get up and fix a leaky faucet yourself. Doing it yourself will save you from looking for a plumber and paying him ridiculously high rates. And when all is done, you'll get your well-deserved good night's sleep.
You can fix a leaky faucet by yourself, without the need of a plumber. And to show you exactly how to do that, this article will enumerate simple to follow and easy to understand steps.
Here are just some of the basic materials and tools you will need:
- Screwdriver - Washers
Before You Start
1. Turn off the water supply. Look under your sink and search the pipes for a shutoff valve. Once you locate it, turn its handles counter-clockwise to shut it off.
2. Always keep a collection of replacement parts like washers and O-rings handy. This is to save you from time in looking for one.
3. Make sure to plug down the drain (maybe with rags). This is to avoid having small parts like screws and washers go down the drain.
4. While working, line up the parts according to the order it was taken apart. This will later on guide you in reassembling it correctly.
Begin Working!
1. First, take the faucet handles off. You can do this by using your screwdriver to remove the screw that is holding them on. Once you've removed the screws, lever the handles open using a flathead screwdriver.
2. Afterwards, remove the old washer located behind the handle. If there's none available, buy one.
3. With the new washer that you just bought, replace the old washer. Put it where the old washer used to be. Keep in mind that the hole in the washer must be just a little bit bigger than the post where the handle turns.
4. Reconstruct the faucet. Remember to do replace the parts in the opposite order as when you took it apart. Put the handle back to its post and screw it in. In screwing it, make sure that you do not tighten it too much, since this can cause damage to brass fittings. Keep it hand-tight.
5. Check if you did the right thing. Turn your water back on by moving the handles of the shut-off valve to the left or clockwise. Remember, righty-tighty, lefty-loosey.
6. There shouldn't be any leaky faucet if everything went well. If not, though, try tightening the screws a wee bit more, or repeat the whole process again. If that still doesn't work, and if all else fails, admit defeat and call a plumber.
Miscellaneous Tips
When you go to the hardware to buy a washer, ask assistance from the employee available. He or she might be able to suggest to you a specific type of washer that is suited especially for the type of sink you have at home.
If your faucet handle post contains nasty lime build-up, clean it up using lime-away products. Sometimes, lime build-up can be a cause for leaky faucets.
There's no need for you to stay awake at night and listen to the annoying noise of a leaky faucet instead of enjoying fitful sleep. Learn to fix a leaky faucet yourself and say goodbye to plumbers, high plumbing costs, and sleepless nights.
Article Source: http://www.search-raven.com
About the Author
Find out how to fix a leaky faucet yourself. Find your faucet guide!
This article is licensed under a Creative Commons Attribution - No Derivative Works 3.0 Unported License, which means you may freely reprint it, in its entirety, provided you include the author's resource box along with LIVE links (without "nofollow" tags).
by: KayeFretz
Total views: 22
Word Count: 568
Rating: Not yet rated